2023 Gincor Extendable Step Deck Tanker Trailer Base
Information
2023 Gincor Extendable Step Deck Tanker Trailer
Photos
Highlights
Truro, Nova Scotia
2023
Gincor
Extendable Step Deck Tanker Trailer Base
Main chassis +/-beams fabricated in house of T-1 100,000 yield steel “I” beams | Upper Deck 10’ with 6” perimeter frame on 4” ch crossmembers. Rub-rail & pockets on 2’ centers. | Lower deck outer frame 18” tubular steel, 55” chassis width. | 16” “I” beam pullout section. Fixed section will be open center with eight 10” preformed 3/16” crossmembers recessed 3”
Available
Saddle: 16” | 49” Coupler
Specifications
2023
Gincor
Extendable Step Deck Tanker Trailer
Base
Tank
25,000Lb. x 79 ½” track x 5” round, tapered spindles & bearings
Collapsed 57’2” Extended 77’2”
8’6” to 12’-0”
Deck: Closed 33’6” Extended 57’6”
26” | Upper: 60”
Saddle: 16” | 49” Coupler
8”
2 Pair, Amber flashing lights at front of tandem. 2 4-Pin sockets located rear of trailer for magnetic strobes | Lighting: All lighting D.O.T. Standards
Inner and outer white steel powder coated wheels | Pull out style, air activated locking pins (every 3 ft.) and steel rollers | Tie Downs: 1 pair located rear of G/N both sides / 1 pair in center of bolsters of rear bridge / 1 pair on side of outter top flange of pull out section | Flag Holders: 1 pair located rear corners of rear fenders.| Hubs: 10 bolt hub piloted oil bath with sight caps & metric long studs. | Storage: Front of G/N and rear of G/N with steel hinged door. | Mud Flaps: 1 pair located on rear of last axle | Conspicuity Tape: To D.O.T Standards red/silver | Documents: Holder mounted roadside front of G/N.
Paint: Standard colors, commercial sandblast, 2 part epoxy primer, polyurethane finish coat.
245/70R J 17.5 Continental HSR2SA 18 ply.
10 bolt 8.25 x 22.5 steel white.
Main chassis +/-beams fabricated in house of T-1 100,000 yield steel “I” beams | Upper Deck 10’ with 6” perimeter frame on 4” ch crossmembers. Rub-rail & pockets on 2’ centers. | Lower deck outer frame 18” tubular steel, 55” chassis width. | 16” “I” beam pullout section. Fixed section will be open center with eight 10” preformed 3/16” crossmembers recessed 3”
Wabco 4S2M system with roll stability | 16.5 ” x 7” air, Haldex auto slacks, 30/30 maxi chambers, cast OB drums and dust covers,
3 Hendrickson 25,000 lbs x 6.5” R/H C/W stainless steel load gauge & dump located roadside centre bolster. Manual lever for various heights, located roadside center bolster.
