1 5/16” Apitong Decking | Lower Deck: 38’ X 102” | Approach angle when lifted is approximately 6 ½-8 degrees. | Storge: 2 – aluminum box 12” x 24” x 36” upper deck each side.
48 Ft.
Deck: 102” | Upper Deck: 102”
Pin Set Back: 21”
Coupler: 49” | 37”
Upper: 60” Approximate
Upper Deck: Lower Deck: 10’
2-5” hydraulic cylinders at 2000 min to 3000 max psi | Wet line connection at front rail for tractor connection.
Securement: Deck comes with chain keyhole slots every 2’. | Jack: 1pr. Holland mark v 2-speed, heavy duty. | WINCH: 2 speed 30,000 lbs. Warn winch, 245 feet of 5/8 cable.| Axle Motion: Axles move on 4, 6” diameter rollers, powered by two 4” hydraulic cylinders. Sliding axle speed is controlled by output of truck hydraulic fluid and is measured is gallons per minute | Hubs: 15" - 8 bolt piloted. | Mud Flaps: 1pr. behind fixed tridem | Conspicuity Tape: All round to D.O.T. Standards.
Main beams fabricated in house of T-1 100,000 yield plate 16” main beams. Crossmembers are 3” I-beam. All side rails fabricated T-1 upper deck is T-1 and HSLA plate fabricated main beams, 12” depth with 8” channel crossmembers and 10” deep outside rail.
Fifth Wheel Plate: 3/8” HSLA plate with 2” Holland SAE pin. | Hubs: 15"- 8 Bolt Piloted | 12-steel 8 bolt 6.75 X 17.5.
12 – 235/75r17.5 Cooper Tires
3 – Hendrickson HT250 series underslung 6.5” Ride height, 60” x 60”x 60” C/W dump valve & load gauge.
23,000lb. X 77 ½”
3
12.25 X 7.5 C/W 30/30 Maxis; auto slacks & dust shields. | 2SIM Haldex
7-wire cable harness C/W 7 pin plug. Junction box front of trailer
LED strobe lights rear facing deck work lights stop, turn and running lights side marker lights
